Solar Boost Charge Controllers by Blue Sky Energy
Blue Sky Energy created the Integrated Power Net™, or IPN Network to provide both a charge controller communication strategy as well as create the next generation of Solar Boost MPPT charge controllers. The advanced high speed digital network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN Network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN Network does not require an additional controller, display or other special communication hardware or software to operate.
|
Solar Boost 3024iL & 3024DiL
12V / 24V MPPT charge controller
Solar Boost 3024iL’s advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy’s advanced IPN™ network interface are also included.
- 40 amp 12V or 30 amp 24V rating supports a wide range of applications
- Auxiliary output serves as 20 amp load controller or 2 amp battery charger
- Load controller provides fully adjustable dusk to dawn lighting control
- IPN network interface coordinates multiple controllers & shares optional battery temperature sensor & display
- Optional IPN-ProRemote display provides complete charge control & battery system monitoring, eliminating the need for a separate battery monitor device
- 3-Stage charge control with filtered PWM output & auto/manual equalization improves battery performance & life
- MPPT power converter can charge 12 volt batteries from 24 volt PV module
- Durable powder coat finish & conformal coated electronics resist corrosion
- Full 24 month limited warranty, optional extended coverage available
- Battery temperature sensor input
- ETL listed to UL STD. 1741, certified to CAN/CSA STD. E335-1/2E, CE labeled
|
|
Solar Boost 50 & 3048
SB50 - 12V / 24V 50 amps output
SB3048 - 24V / 48V 30 amp
Solar Boost controllers also provide an advanced fully automatic three stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
- Patented MPPT technology increases charge current up to 30% or more!
- 50A/24V or 30A/48V ratings support large solar module arrays
- Three stage PWM charge control optimizes charge parameters to battery size & type
- MPPT power converter can charge lower voltage battery from higher voltage array
- Electronic current limit prevents overload or nuisance fuse blow
- Available digital display monitors PV charge performance
- Durable powder coat finish & conformal coated electronics resist corrosion
- Fully protected against excess current, temperature, transient voltage & polarity
- Full 36 month limited warranty, optional extended coverage available
- ETL listed to UL STD. 1741, certified to CAN/CSA STD. E335-1/2E, CE labeled
|
|
Solar Boost 2000E
12V / 25 amp MPPT charge controller
he Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
A built in LCD digital display monitors solar charge performance.The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.
- Patented MPPT technology increases charge current up to 30% or more!
- 12 Volt / 25 Amp rating supports wide range of applications
- Multi-stage stage PWM charge control improves battery performance & life
- Electronic current limit prevents overload or nuisance fuse blow
- LCD digital display monitors PV charge performance
- Durable powder coat finish & conformal coated electronics resist corrosion
- Available temperature compensation further improves battery performance and life
- Fully protected against excess current, temperature, transient voltage and polarity
- Full 36 month limited warranty, optional extended coverage available
|
